Laundry may seem easy. Add clothes, detergent and press “Start” on your washing machine. But you might not know that your clothes can turn into bacteria. And if you only use the cold water setting, your front-load or top-load washer is even more likely to develop mold.
Both your laundry room and your clothes can start to smell like sulfur and you might be wondering where the rotten egg smell is coming from. It might be time to thoroughly clean your washing machine or mold is growing inside your high-efficiency washing machine.
On the bright side, you don’t have to live with that smell. I’ll walk you through some steps to keep your washing machine from being a hotbed for bacteria and how to kill any mold that may already be there. We recently updated this story.
24 unusual things you can clean in your washing machine besides clothes
Dry damp rooms
Once you are done using your washing machine for the day, be sure to wipe down any part of the washer that is wet. This includes the cover, drum, door, rubber gaskets and detergent dispenser (if your machine has this feature). Keep an old towel handy just for this purpose.
Leave the door open
Mold thrives in dark, damp areas, which is what your washer becomes after unloading clothes. Leaving the door open helps ventilate the washer and prevent mold growth.
Take out your wet clothes right away
When you plan to throw in a load of laundry, be sure to be home to remove the clothes when the timer goes off. This means that do not start the washer before going to work or to bed. Not only does this prevent mold from growing in your washer, it also keeps your clean clothes from molding.
Regularly clean the gaskets
While mold contamination can occur in any washer, this is especially common in high efficiency front loading (aka HE) washers. That is why you should wash the gaskets and gaskets around the door regularly. The gaskets ensure that water does not escape around the door and also do a good job of sealing in moisture which can promote mold growth. Be sure to dry the seams with the rest of your washer to prevent moisture from remaining.
Use an HE powder detergent (not too much)
Liquid detergents can leave a residue in your washing machine, giving molds a food source. So the first thing in mold control is to make sure you are using laundry detergent specifically designed for your HE washer which will produce less suds. (Look for the letters HE on the soap container.) The next step is to skip the liquid and switch to powder detergent or pods. And whatever you choose, make sure you only use the amount you need to wash your clothes. If you use too much, your clothes may have an odor and residue that may not really clean your clothes.
How to kill washing machine mold
If you have mold, here’s how to get rid of it.
1. Put on gloves first and grab an old towel you don’t care about.
2. Mix a solution of bleach and hot water or vinegar and hot water. Never mix bleach and vinegar, as this creates chlorine gas which can be harmful to you.
3. Dip the towel into the mixture and start cleaning up any visible mold. Make sure you hit the detergent dispenser and around the seals.
4. If there is a gasket around the door (front load washers have one), clean and dry it thoroughly and thoroughly, including any creases.
5. Run a wash cycle on the hottest setting offered by your machine with a cup of bleach or vinegar. If you are using bleach, pour it into the bleach compartment. If you are using vinegar, pour it into the detergent slot. If your machine has a cleaning cycle, you can use this setting. This should kill any hidden mold you may have missed.
6. Then use another old towel and wipe off all the moisture from your washing machine. This includes the drum, distributors, seals, and any other areas you can reach.
7. Finally, leave your washer door open to allow air circulation to dry out any parts you missed. Doing this every month will help prevent mold growth.
Once you’ve cleaned your washer, it’s time to move on to the rest of your home. Start with the bathroom – here is how to clean your shower head, a simple one-hour science hack for degunking, and how to unclog a toilet without a piston.
[ad_2]
Source Link